Both owners and contractors are unhappy about discolored concrete. There are several ways this might appear in concrete, such as large color variations, light or dark spots, or early light efflorescence. Due to many factors, this is a problematic issue that is difficult to prevent.
Changing cement color, using cement replacements, poor workmanship, and inconsistent mixtures can all cause discoloration in concrete. Immediately after concrete placement, discoloration occurs due to these factors.
Key Reason for Color Discoloration
Water Addition in Construction Site
Concrete with a blotchy appearance is produced by changes in the mix without adequate mixing on the field. To improve workability and make finishing operations easier, contractors can add water to concrete batches.
When concrete is placed side-by-side, the color differences become evident. When tempered concrete is poured next to earlier non-tempered concrete, for instance, water is added to one batch.
Partial Cement Replacement
The percentage of recycled materials used in the mix, water-to-cementitious materials ratio, and method of curing concrete can all affect the color of the concrete when using recycled products as partial cement replacements. Fly ash produces a variety of hues, ranging from buff to brown, when compared with slag, which has a slight green or bluish tint initially.
Material Placement on Concrete during Initial Curing
Plastic, lumber, or construction debris left on colored concrete during the curing process results in blotchy, irregular surfaces, with lighter colors where the materials were placed. During the critical first few days to weeks after pouring concrete, a curing differential occurs due to different moisture levels at the surface. The key to producing a consistent colored concrete surface is uniform curing.
Concrete surface discoloration can be caused by plastic sheets placed on concrete to improve curing. Spotting is caused by wrinkles or gaps in plastic covers or curing blankets that cause discoloration.
Low Quality Material
In order to avoid unpleasant colors, consistency in mix proportioning is important during the concreting process. The color of concrete will vary from batch to batch at the project site due to differences in batching.
Concrete mixes are also difficult to produce because they contain a variety of materials with inherent variability. There are four main components of a concrete mixture: cement, additional Cementitious materials, sand, water, admixtures, and possibly fibers. Different concrete batches interact differently and it is difficult to achieve consistency between them.
Low Level of Labor
Before and during concrete pouring, contractors should consider the weather conditions, as they have a significant impact on the final product. The subgrade should be wetted before concrete is poured on top in a dry environment.
Concrete surfaces can become more variable in appearance and prone to delimitation if dry finishing is performed while bleed water remains on the surface. Additionally, the placement of concrete in hot weather increases evaporation rates, so it may be necessary to use evaporative retarders, windbreaks, or any other appropriate practices.
Published By
civilguidelines
www.civilguidelines.com
CivilGuidelines 